Installing Realisable IMan

Get IMan installed with these steps:

  1. Start the IMan installer by running the IManInstaller.exe file.
You will probably receive a message in respect to User Access Control (UAC) assuming it's enabled on the workstation or server.
  1. When prompted, press 'Next' to start the installation.
  2. Accept the license agreement (rejecting will cancel installation).

  1. Enter a directory location to store the IMan configuration files, according to the following:
    1. The directory should have a path that is local to the machine.
    2. It is recommended that the path be a subdirectory to the root of a drive, and be named IMan, as shown below.

This folder contains the job configuration files and requires backing up.

  1. Select the Website, Virtual Path and Application Pool the web interface of IMan will use:

  1. Site
    1. This is your chosen Web Site defined in your IIS Manager.
  2. Virtual Path
    1. The virtual path is the first part of the URL after the hostname of the server. The URL to open IMan will always be in the form:
    2. http://<hostname>/IMan/.....

Example

  • Press 'Next' to start the installation.

  • When the installation is complete, press 'Close'.
    • After the installation is complete, there are several configuration steps required before IMan can be used. Please see Setting Up IMan for details.